Casella-cel Software for the Tuff sampling pumps Manuel d'utilisateur télécharger pdf (Page 13)

CHAPTER 5 CONFIGURATION

This allows basic settings such as display language and measurement units to be

changed, gives access to Calibration and Duration modes, plus the additional modes

available to Tuff Pro models.

Configuration Mode can be activated only while switching the instrument on.

A. ACCESS CONFIGURATION SCREENS (Fig. 15)

When powering up, simultaneously press and hold the UP arrow. This allows access

to the configuration screens. After approximately 8 seconds the Set Language screen

is displayed.

Figure 15 Access Configuration Screens

B. SET LANGUAGE (Fig. 16)

Use UP/DOWN keys to select a language. Press ENTER to load the language and

continue setup.

Figure 16 Set Language

C. CONTRAST (Fig. 17)

Use UP/DOWN keys to adjust the contrast. Press ENTER to save.

Figure 17 Set Contrast

D. TEMPERATURE (Fig. 18)

Use UP/DOWN keys to select the required unit for displaying the ambient air

temperature (

◦

C or

◦

F) then press ENTER.

Casella CEL Limited

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Pas de commentaire

Casella-cel Software for the Tuff sampling pumps Manuel d'utilisateur Page 13